< Return to Samples

viper

Viper Plagiarism Scan

Plagiarism Report For '500746-576113.docx'

Viper scans your work against over 10 billion web pages as well as any work previously submitted to our firm. Once the scan is completed, the report highlights content that may match these other sources, including links to the relevant sites.

However, not all matching content is a negative thing. Examples of acceptable matching content include: quotations, reference lists/bibliographies, the essay title or question, tables and charts, appendices, and common terminology and phrasing.

Overall plagiarism rating 10% or less : The results show that it is highly unlikely that this document contains plagiarised material. A careful check will only be necessary if this is a lengthy document.

Overall plagiarism rating 11% - 20% : The results show that there is a low risk that the document contains any plagiarised material. Most of the matching content will probably be fragments. Review your report for any sections that may not have been referenced properly.

Overall plagiarism rating 21% + : The results show that there is a moderate risk that the document contains plagiarised material. If the overall rating is this high, you need to check your report very carefully. It may be that the bibliography or quotations have caused this, but it is critical that you go through the document and review the areas that the scan has flagged to try to reduce this percentage.

Document Text

Brief 500746
Dissertation proposal
Title: To explore the relationship between sustainability and the Circular Economy by considering its impacts on business models and innovation.
Introduction
The proposed dissertation topic is to explore the relationship between sustainability and the Circular Economy considering its impacts on business models and innovation. This topic has arisen from the need to address the increased challenges of how to align economic growth with the need to address societal inequalities and environmental degradation which is seeing an increased level of stakeholder interest and demands for higher levels of action from governments and businesses (United Nations Climate Change 2019; Mulvihill and Harris Ali 2017; George et al 2016). These challenges include a wide range of issues from the concept of planetary boundaries (Galaz 2012; Rockstrom et al 2009) to the use of the Internet of Things as a method to address and develop solutions such as tracking products throughout the lifecycle to ensure that there is a higher level of reuse and recycling (Trott 2017; Braungart and McDonough 2009).
These challenges will be explored through the concepts of sustainability and the Circular Economy which present the opportunity to develop a greater understanding of the challenges of developing the links between the economic, societal and environmental factors of production and consumption (Mulvihill and Harris Ali 2017; Crane and Matten 2016).
This will undertake a literature review on the current perspectives of the concepts of sustainability and the Circular Economy and present the similarities and differences between these (Geissdoerfer et al 2017). These will then be further explored by evaluating the impacts of sustainability and the Circular Economy on business models and innovation by analysing the different business activities being undertaken to address these (Mulvihill and Harris Ali 2017; Markard 2012).
Research Aim and objectives
Research aim: To explore the relationship between sustainability and the Circular Economy by considering its impacts on business models and innovation.
Objective 1: To examine the similarities and differences between sustainability and the Circular Economy.
Objective 2: To investigate the impacts of sustainability and the Circular Economy on business models and innovation.
Objective 3: To evaluate the relationship between Sustainability and the Circular Economy
.
Literature Review
The purpose of the literature is to not only explore the current academic research which is relevant to this proposed dissertation but to also locate the research gaps which will provide the dissertation with the opportunity to provide a contribution to the current level of knowledge in this subject area (Cresswell and Cresswell 2018). The initial literature review will include an exploration of the concepts of sustainability and the Circular Economy.
Sustainability
The concept of sustainability can be examined from a variety of perspectives which include the necessity to consider the finite nature of resources and to evaluate how these can be conserved and preserved to prevent their loss and to support biodiversity and ecosystems (George et al 2016; Galaz 2012; Rockstrom et al 2009). Sustainability also includes the need to address the challenges of intra and inter-generational equity and to ensure that the present quality of life does not compromise future generations by increasing the level of societal inequality and environmental degradation (Mulvihill and Harris Ali 2017; Geissdoerfer et al 2017). Sustainability is therefore focused on how the tensions between economic growth, society and the environment can shift from a process of exploitation, based upon current production and consumption methods, to one where there are greater levels of equality between these three areas (United Nations Sustainable Development Goals 2019; Mulvihill and Harris Ali 2017; Geissdoerfer et al 2017; Beder 2006).
The Circular Economy
The Circular Economy has gained increased levels of academic interest due to the increased level of awareness created by the work and support of government institutions such as the European Union and private institutions such as the Ellen MacArthur Foundation (European Union [EU] 2019; Ellen MacArthur Foundation 2017). This work has seen strategies and support being developed to encourage the wider use of the principles of the Circular Economy which undertakes a restorative and regenerative approach to increase resource efficiency and reduce waste (Ellen MacArthur Foundation 2017). The Circular Economy is based upon the need to move away from linear production and consumption patterns (cradle-to-grave) which to a closed loop system (cradle-to-cradle) (Braungart and McDonough 2009). Whilst this dissertation will focus on the Circular Economy, there are also an increasing number of similar activities which seek to address linear production processes to reduce the use and harm created by these and these include biomimicry (Benyus 2002); the looped economy (Stahel 2010) and the blue economy (Pauli 2017).
Similarities and differences between the concepts of sustainability and the Circular Economy
One of the main similarities between sustainability and the Circular Economy includes the focus of each upon the need for business models to undertake innovations to address the challenges of societal inequality and environmental degradation (Geissdoerfer et al 2017). However. One of the differences between the two concepts relates to the scope and this presents sustainability as a far broader approach to the challenges of economic growth, societal inequalities and environmental degradation (Mulvihill and Harris Ali 2017; Geissdoerfer et al 2017). In contrast, the scope of the Circular Economy is more focused on the economic perspective and the benefits which this can provide for society and the environment (Geissdoerfer et al 2017; Braungart and McDonough 2009).
Research gaps
The research gaps from the initial literature review includes the lack of academic research into the relationship between sustainability and the Circular Economy which has failed to robustly address the similarities and differences between the two concepts (Geissdoerfer et al 2017). There is therefore a lack of conceptual clarity as regards the definitions and understanding of sustainability and the Circular Economy and how these can be more successfully integrated to address the challenges of social equality and equity; increase environmental resilience and maintaining economic prosperity (Geissdoerfer et al 2017; Mulvihill and Harris Ali 2017).
Methodology
The methodology will provide the selected research paradigm and the data collection and analysis process and the justification for this (Cresswell and Cresswell 2018; Saunders et al 2016). This decision-making process has been based on the most appropriate and effective way in which the research aim can be explored, evaluated and communicated in the research to ensure that it provides a contribution to the current level of knowledge, both from an academic and business perspective (Cresswell and Cresswell 2018; Saunders et al 2016).
Research paradigm
The selected research paradigm in interpretivist and the rationale for this includes the following:
The interpretivist paradigm supports the development of multiple meanings and thus allows the complexity of the relationship between sustainability and the Circular Economy to be more fully explored (Cresswell and Cresswell 2018; Saunders et al 2016).
Interpretivism supports the researcher’s assumptions about the world which include their ontological (nature of reality) and epistemological (validity of knowledge) outlook (Saunders et al 2016; Bryman and Bell 2015). Within the interpretivist paradigm, the ontological assumption supports the development of multiple meanings regarding the research topics such as the similarities and differences between the concepts of sustainability and the Circular Economy and enables the communication of these in the data collection and analysis process (Cresswell and Cresswell 2018; Gill and Johnson 2010). In addition to this, the epistemological assumption in the interpretivist paradigm supports the development of a greater understanding of the research topics by considering different meanings (Cresswell and Cresswell 2018; Saunders et al 2016).
To further support the selection of the interpretivist approach, the methodology will also include the rationale for the rejection of the positivist paradigm which includes the following reasons (Cresswell and Cresswell 2018; Bryman and Bell 2015).
Positivism, despite its strengths in employing a range of robust research conventions, undertakes a cause and effect approach relying with a reliance on specific variables (Cresswell and Cresswell 2018; Saunders et al 2016).
Positivism seeks to prove or disprove a theory which in the context of the high level of uncertainty and complexity relating to the concepts of sustainability and the Circular Economy would reduce the level of meaning of these (Bryman and Bell 2015; Neuman 2013).
Data collection and analysis
The data collection will include secondary data from an academic literature review to explore the concepts of sustainability and the Circular Economy and the similarities and differences between these. Secondary data will also include the analysis of case studies of businesses to further explore the practical application of sustainability and the principles of the Circular Economy in terms of changes in business models and innovation (Trott 2017; Mulvihill and Harris Ali 2017). The data collection will include multiple sources and will therefore support a mixed methods approach (Molina-Azorin and Cameron 2010; Tashakkori and Teddlie 2010).
The data analysis will undertake a thematic approach based upon the research aim and objectives (Saunders et al 2016). This analysis is based on an exploratory approach which seeks to increase the level of understanding of a particular topic and the inductive approach which relates to the context of the data within the case studies of the selected businesses (Cresswell and Cresswell 2018; Yin 2018).
Ethics
Whilst no primary data is being collected, it is still important to consider ethics within the research process to ensure that no harm occurs to either the researcher, the research participants nor to the university (Cresswell and Cresswell 2018). The research ethics for this dissertation proposal will therefore include the need to ensure that information from the secondary sources is presented fairly and accurately (Saunders et al 2016; Bryman and Bell 2015).










References
Beder, S (2006) Environmental Principles and Policies – An interdisciplinary introduction (1st ed.) London: Earthscan
Benyus, J.M. (2002) Biomimicry. (1st ed.) Harper Perennial, New York
.
Braungart, M. and McDonough, W. (2009) Cradle to Cradle: Remaking the way we make things (2nd ed.) London: Vintage
Bryman, A. and Bell, E. (2015) Business Research Methods. (4th ed.) Oxford: Oxford University Press

Crane, A. and Matten, D. (2016) Business ethics: Managing Corporate Citizenship and Sustainability in the Age of Globalisation (4th ed.) Oxford: Oxford University Press
Cresswell, J.W. and Cresswell, J.D. (2018) Research Design: Qualitative, Quantitative and Mixed Method Approaches (5th ed.) London: Sage

Ellen MacArthur Foundation (2017) ‘Concept’ [online] Available from https://www.ellenmacarthurfoundation.org/circular-economy/concept
European Union (2019) ‘Towards a circular economy’ [online] Available from https://ec.europa.eu/commission/priorities/jobs-growth-and-investment/towards-circular-economy_en
Galaz, V., Biermann, F., Folke, C., Nilsson, M. and Olsson, P. (2012) ‘Global environmental governance and planetary boundaries: An introduction’ Ecological Economics Vol. 81, pp. 1-3
George, G., Howard-Grenville, J., Joshi, A., and Tihanyi, L. (2016) ‘Understanding and Tackling Societal Grand Challenges through Management Research.’ Academy of Management Journal, Vol.59(6), pp.1880-1895
.
Geissdoerfer, M., Savaget, P., Bocken, N.M.P. and Hultink, E.J. (2017) ‘The Circular Economy: A new sustainability paradigm?’ Journal of Cleaner Production, Vol.143, pp.757-768

Gill, J. and Johnson, P. (2010) Research Methods for Managers (4th ed.) London: Sage
Markard, J., Raven, R. and Truffer, B. (2012) ‘Sustainability transitions: An emerging
field of research and its prospects.’ Research Policy Vol.41 (6), pp.955–967.
Molina-Azorin, J. and Cameron, R. (2010) ‘The Application of Mixed Methods in Organisational Research: A Literature Review’ Journal of Business Research Methods, Vol.8(2), pp.95-105

Mulvihill, P.R. and Harris Ali, S. (2017) Environmental Management: Critical Thinking and Emerging Practices. (1st ed.) Abingdon: Routledge
Neuman, W. L. (2013) Social research methods: Qualitative and quantitative approaches (1st ed.). London: Pearson Education Ltd

Pauli, G. (2017) The blue economy systems approach (2nd ed.) New York: The World Bank.
Rockström, J., W. Steffen, K. Noone, Å. Persson, F. S. Chapin, III, E. Lambin, T. M. Lenton, M. Scheffer, C. Folke, H. Schellnhuber, B. Nykvist, C. A. De Wit, T. Hughes, S. van der Leeuw, H. Rodhe, S. Sörlin, P. K. Snyder, R. Costanza, U. Svedin, M. Falkenmark, L. Karlberg, R. W. Corell, V. J. Fabry, J. Hansen, B. Walker, D. Liverman, K. Richardson, P. Crutzen, and J. Foley (2009) ‘Planetary boundaries: exploring the safe operating space for humanity,’ Ecology and Society, Vol. 14(2) [online] Available from http://mahb.stanford.edu/wp-content/uploads/2011/12/2009_Rockstrom-Planetary-Boundaries.pdf
Saunders, M., Lewis, P. and Thornhill, A (2016) Research Methods for Business Students (7th ed.)
Harlow: Pearson Education Ltd
Stahel, W. (2010) The performance economy. (1st ed.) London: Palgrave Macmillan.
Tashakkori, A. and Teddlie, C. (2010) Handbook of Mixed Methods in Social and Behavioural Research (revised ed.) Thousand Oaks, California: Sage

Trott, P. (2017) Innovation Management and New Product Development (6th ed.) Harlow: Pearson Education Ltd
United Nations Climate Change (2019) ‘The Paris Agreement’ [online] Available from https://unfccc.int/process-and-meetings/the-paris-agreement/the-paris-agreement
United Nations
Sustainable Development Goals (2019) ‘Sustainable Development Goals’ [online] Available from https://www.un.org/sustainabledevelopment/sustainable-development-goals/
Yin, R.K. (2018) Research and Applications: Design and Methods (6th ed.) Thousand Oaks, CA: Sage